Wunder-audio CM67 Uživatelský manuál stáhnout pdf

1. CM67

The Wunder Audio CM67 Tube Microphone is targeted to the

professional with the most demanding criteria. These boutique

microphones are hand assembled in Texas per customers order.

Tubes are hand tested NOS EF86.

How to replace the vacuum tube

Disconnect microphone from PSU.

Remove the three nickel screws at the lower end of the microphone

grille housing.

The Grille can be pulled off in upwards direction.

Next remove the small screw that is located several inches below

the Wunder Audio diamond badge.

The Complete body shell can now be pulled off in an upwards

direction.

The vacuum tube can now be removed by wiggling the tube with a

downward motion taking care to clear the large black transformer

below it.

Insertion of a new tube should be done in reverse order

of the description above.

How to change the polar pattern.

Locate the pattern switch on the PSU. Use this switch to operate the

Directional Characteristics: Omni-, cardioid-, ﬁgure-eight, and eight

intermediate positions. The center position is the Cardioid setting.

As you turn from position to position it will take a few seconds for the

polarization voltage to settle and achieve the desired polar pattern.

1 2 3

Shrnutí obsahu

Strany 1

1. CM67The Wunder Audio CM67 Tube Microphone is targeted to the professional with the most demanding criteria. These boutique microphones are hand ass

Strany 2

How to mount the microphoneA special shock mount/stand adapter is provided and should always be used to mount the microphone on ﬂoor stands or booms.

Strany 3

3. Speciﬁcations of the MicrophoneDirectional Characteristics: Omni-, cardioid- Figure EightCardioid (20 mV/Pa; 20 - 18,000 Hz)Omnidirectional (11 mV/

Komentáře k této Příručce

Žádné komentáře

Wunder-audio CM67 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Mikrofony Wunder-audio CM67. Wunder Audio CM67 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce